nokia
C
ONNECTING
P
EOPLE
PAGE 15 (23)
Approved 3.0
CMO Operations & Logistics
DJk
WW Service Solutions & Development
Bochum / Germany
CONFIDENTIAL
24.01.2005
Place the opening tool between Antenna and D-Cover.
Use the SRT-6 as a lever to open the clips when
removing Antenna.
Remove the IHF Speaker by using tweezers.
A TORX driver can be used to push out the IrDA
Window of its fixing.
9. LEGEND FOR QUICK TROUBLE SHOOTER
This legend is valid for all parts of the Quick Trouble Shooter
Follow the steps until the problem is solved. If this doesn’t help, you are not authorized to go forward. Only
underlined components ( e.g. I002) can be changed.
The start point of repair activities regarding the appeared fault symptoms.
Follow the arrows step by step
Pads or contacts: Check optical and mechanical condition particularly regarding
to corrosion. Clean if necessary.
Measure component for electrical functionality and change, if needed.
(Level 2 only)
Pads or contacts: Check optical and mechanical condition particularly regarding
to corrosion. Clean with ESD brush only, if necessary.
No more actions possible send product to the appropriate service partner with
higher service level.
Service Manual 6230/i Level 1&2
Copyright © 2004-2005 Nokia Corporation. All rights reserved.
