S e t t i n g s
56
Call divert
— to divert your incoming calls (network service). You may
not be able to divert your calls if some call barring functions are active.
See
Call barring service
Automatic redial
>
On
— to make a maximum of 10 attempts to connect
the call after an unsuccessful call attempt
Anykey answer
>
On
— to set the phone to answer an incoming call by
pressing any key except the power or end keys.
Speed dialling
>
On
— to dial the names and phone numbers assigned to
the speed-dialing keys
2
to
9
, press and hold the corresponding number
key
Call waiting
>
Activate
— to have the network notify you of an incoming
call while you have a call in progress (network service). See “Call
waiting,” p. 24.
Summary after call
>
On
— to briefly display the approximate duration
and cost (network service) of the call after each call
Send my caller ID
>
Yes
— to show your phone number to the person you
are calling (network service). To use the setting agreed upon with your
service provider, select
Set by network
.
Line for outgoing calls
— to select the phone line 1 or 2 for making calls
if supported by your SIM card (network service)
■
Phone
Select
Menu
>
Settings
>
Phone
and from the following options:
Language settings
— to set the display language of your phone, select
Phone language
. If you select
Automatic
, the phone selects the
language according to the information on the SIM card.
To select the USIM card language, select
SIM language
.
To set a language for the voice playback, select
Voice playback language
.
See “Make a voice dialing call,” p. 24 and
Voice commands
Memory Status
— to view the amount of used and available phone
memory.
