nokia
EOPLE
C
ONNECTING
P
19 (22)
Approved 1.0
CMO Operations & Logistics
MGR
WW Service Solutions & Development
Bochum / Germany
IDENTIAL
17.3.2005
Service Manual 6021 Level 1&2
Copyright © 2005 NOKIA Corporation. All rights reserved.
PAGE
CONF
14. BLUETOOTH & INFRARED TEST
Bluetooth test
You need another Bluetooth device (e.g. 6230) to do a GoNoGo test.
Make sure that Bluetooth is activated in the reference unit. The distance of the devices should be not more than
5m from each other.
Infrared test
You need another infrared device (e.g. 6230) to do a GoNoGo test. The infrared windows of the devices must be
directed to each other and should have a distance of approximate 15 cm. Make sure that infrared is activated in
receiver device.
Warning: Do not point the IR (infrared) beam at anyone’s eye or allow it to interfere with other IR devices. This
device is a Class 1 Laser product.
Test unit
Reference unit, Bluetooth /infrared activated
Settings on the test unit:
•
Press the red End key to reach the Home Menu
•
Select Names and select Search for an entry
If phone and SIM memory is empty, create one new entry.
•
Select an entry and select Details
•
Select Options
•
Select Send business card
A) - for infrared test: Select Via infrared
If sending of business card fails, make sure again that infrared windows are directed to each other and
infrared is activated in reference device. Then try again sending.
Test was successful, if you get this message on receiver device.
You will not get a confirmation on sender device.
B) - for Bluetooth test: Select Via Bluetooth
If needed (for e.g. after a sw-update), enter a name for this device
•
select Options
•
select Accept
Search window appears, if all Bluetooth devices in range will be displayed, the test is successful!
•
Press red End key to reach the Home Menu
Note: If the Bluetooth is activated, switch it off!
