Configuration
©
2001 Nokia Mobile Phones. All rights reserved.
30
5. Configuration
Methods
The Nokia 22 PBX connectivity terminal can be configured using a DTMF tele-
phone connected to the application module or using the Nokia 22 Configurator
Software. The Nokia 22 Configurator Software is a tool for the configuration of
the terminal. For further information, see “6. Accessories” on page 34.
The settings can also be modified via a PBX.
Note:
When multiple Nokia 22 PBX connectivity terminals are connect-
ed to a single PBX, the PBX may treat them as a pool of devices. As a
result, it is not possible to change the settings of a specific Nokia 22
connectivity terminal via the PBX. For further information, contact your
service provider.
For terminal tone indicators, see “ Terminal tone indicators” on page 20.
Basic settings
Basic settings include PIN and PUK code input, the speaker volume control and
activation of the Intensity of Field (IOF) feature.
Entering PIN and PUK code
To enter the PIN code, key in
PINCode#
.
To enter the PUK code, key in
PUKCode#
.
Entering PIN code does not succeed
If entering the PIN code fails three times, the code is blocked. You can unblock
it by entering your PUK (Personal Unblocking Key) code. The PUK code may be
supplied with the SIM card. If not, contact your local service provider for the
code. If you lose the code, contact your service provider. When the PIN code is
blocked, light indicators 3 and 4 blink. To unblock the code, proceed as follows:
1
Lift the receiver of the DTMF telephone connected to the Nokia 22. When the
enter PUK code tone is heard, enter the PUK code followed by #.
2
Enter a new PIN code (4-8 digits) followed by # when light indicator 4 blinks
and the enter PIN code tone is heard.
