Restore original settings
If your phone is not working properly, you can reset some settings to their original values.
1.
End all calls and connections.
2.
Select
Menu
>
Settings
>
Rest. fact. sett.
>
Settings only
.
3.
Type in the security code.
This does not affect documents or files stored on your phone.
After restoring the original settings, your phone switches off and then on again. This may take longer
than usual.
Update your phone software
You can update your phone software wirelessly. You can also set your phone to automatically check
for updates.
You can only update your software when using the SIM in the internal SIM holder.
1.
Select
Menu
>
Settings
>
Phone
>
Device updates
.
2.
To check if there is an update available and to download it, select
Downl. phone sw
.
The update may take several minutes. If you encounter problems, contact your network service
provider.
After the update, go to
to get your new user guide.
Your network service provider may send updates over the air directly to your phone. For more info
on this network service, contact your network service provider.
Using services or downloading content may cause the transfer of large amounts of data, which may
result in data costs.
Before starting the update, connect a charger or make sure the device battery has enough power.
Warning:
If you install a software update, you cannot use the device, even to make emergency
calls, until the installation is completed and the device is restarted.
Access codes
Ever wondered what the different codes on your phone are for?
PIN or PIN2 code
(4-8 digits)
These protect your SIM card against
unauthorised use or are required to access some
features.
© 2013 Nokia. All rights reserved.
26
