manualshive.com logo in svg

Nokia 1100 - Cell Phone - GSM, Service Manual, Page: 12 / 18

Share
Download
Nokia 1100 - Cell Phone - GSM Service Manual Download Page 12

nokia

 

 C

ONNECTING

 

P

EOPLE

 

PAGE 12 (18) 

Approved 2.0

CMO Operations & Logistics  

 

MWy

WW Service Solutions & Development 

Confidential  

16.06.2005

Bochum / Germany  

 

 

Service Manual 1100/1101 Level 1&2 

Copyright 2003-2005 © Nokia Corporation 

8.  DOME SHEET EXCHANGE 

 

Use SRT-6 to loosen one corner of the Dome Sheet. 

 

Tear off Dome Sheet in diagonal direction to avoid 

remains of glue. Check pads for cleanness. 

 

Take a new Dome Sheet from carrier film. Do not touch 

the keydomes from adhesive side. 

 

Use the guiding pin and the C-Cover’s edge as 

reference point. 

 

Carefully place Engine Module from topside on. Note 

the guiding pin. 

 

Before sinking the Engine Module, make sure that it is 

also close to the same side of the shielding. 

 

Carefully press-on the Dome sheet to the Engine 

Module to avoid bubbles. 

 

Finally check, if the holes of the Dome Sheet match 

exactly to the ones in the Engine Module. Otherwise 

change Dome Sheet again! Check Keyboard 

functionality. 

 

Summary of Contents for 1100 - Cell Phone - GSM



















Reviews:

No comments