DT710 (ITL-6DE) Quick User Guide (R2.1)
1
DT710 (ITL-6DE)
Quick User Guide
for DT710 phones controlled by
PLACING CALLS
The
or
icon in the display indicates that
the terminal is currently not registered with any SIP
Servers. You can not make any calls.
The
icon indicates that the network cable is
disconnected. You can not make any calls.
The
icon indicates that the terminal is
successfully registered with the SIP@Net Server.
You can make calls as follows :
1.
Lift the handset, press the Speaker key, or select
the NewCall Soft Key to receive dial tone.
2.
Enter the telephone number of the required
party.
3.
Press the Dial Soft Key to initiate the call, or wait
a few seconds for the call to be automatically
dialed.
4.
When the dialed party answers, use the handset,
headset or Speaker to start the conversation.
USING PHONE FEATURE KEYS
1.
Hold
– Places current call on hold.
To resume the held call, press the Hold key, or
press the Resume Soft Key.
During a held call, you can dial another party by
pressing the NewCall Soft Key, which provides
dial tone.
2.
Transfer
– Initiates/completes a transfer.
3.
Speaker
– Full-duplex speaker phone capability.
4.
Recall
– Refer to
Hold
and gives dial tone.
5.
Feature
– This key displays a set of menu options
that provide additional capabilities.
6.
Answer
– Press this key to answer an incoming
call.
7.
Mic
– Press this key to mute the microphone.
The LED flashes when the microphone is muted.
Press the key again to un-mute the microphone.
8.
Menu
– Accesses user settings and information
local to the phone.
9.
Cursor Pad
– Use this key to access various
features with simple operation.
●
Redial (
)
– Pressing this key re-dials the last
number dialed.
●
Directory
– Pressing this key opens
Personal Directory menu.