How to attach and change accessories with the collet nut kit
1.
Take your chosen accessory, the
three golden-colored collets, and try
placing the shank of the accessory in
the collets until you find a collet that
fits.
If you're confused about which are
the collets, you can see what they look
like on page
11
.
2.
Put the accessory aside for now,
and insert the properly sized collet
inside the collet nut.
To see the
difference between the collet nut and the
chuck nut, flip back to page 11.
3.
Put the collet nut with the collet on
the rotary tool shaft.
4.
Take the accessory you had put
aside, and insert it in the collet nut.
25
