21
b. Lubricating points
Lubricate the marked points according to the maintenance checklist. The required grease specification is:
DIN 51825, standard grease.
c. Check and refill hydraulic oil
It is recommended to use hydraulic oil in accordance with average temperature:
Environment temperature
–5
℃
~25
℃
>25
℃
Type
HVLP 32,
DIN 51524
HLP 46,
DIN 51524
Viscosity
28.8-35.2
41.4 - 47
Amount
0.4 L
Waste material like oil, used batteries or other must be properly disposed and recycled according to the
national regulations and if necessary brought to a recycling company.
The oil level in the oil tank should be between min and max marks with fully lowered forks.
If necessary add oil at the filling point.
Lubricating point
s
Fig. 13: Lubricating point
s
