17
d.
Tiller panel
Fault Code
When a fault code is generated, firstly all four battery indicator lights are on, then the first (most left)
battery indicator flashes and counts, then multiply this number by ten for the first number; when the
fourth (most right) battery indicator flashes, counts the times for the second number; Plus these two
numbers you will get the fault code.
Battery state of charge (SOC)
The battery's state of charge is indicated by 4 indicator lights. As the battery gradually discharges, the
battery indicator lights turn on in sequence. When the green light is on, SOC is 75%-100%. When the
blue light is on, SOC is 50%-75%. When the yellow light is on, SOC is 25%-50%, and when the red light
is on, SOC is 0%-25%.
Turtle Symbol
The Turtle Symbol indicator is normally off, when the symbol appears (fixed), it shows activation of the
“soft” mode of the truck, in which maximum speed and acceleration are reduced.
e.
Charging
Before charging ensure that you are using an appropriate charger for charging the
installed battery and that all safety measures are taken into consideration.
Fig. 11: Tiller panel
