13
Fig. 8: Load facing uphill
d.
Travelling
Turn the accelerator knob to the desired direction forward ‘Fw.’ or backwards Bw.’(Fig. 9).
Control travelling speed by operating the accelerator (Fig.7,13) carefully until you reach desired speed.
If you move the accelerator knob back to the neutral position, the controller will decelerates the truck
until the truck stops. If the truck stops, the parking brake will be engaged.
Drive the truck to the destination carefully. Watch the route conditions and adjust the travelling speed by
operating the accelerator.
Press turtle button (Fig.7,18) to enter into slow speed mode, travel slowly by operating the accelerator
knob (Fig.7,14), press turtle button again to switch to regular speed mode.
Press the turtle button and hold it for 2 seconds to activate driving function with tiller in vertical position
when operating in confined areas.
e.
Steering
Steer the truck by moving the tiller to the left or right side.
TRAVEL ON INCLINES ONLY WITH
THE LOAD FACING UPHILL.
DO NOT TRAVEL ON INCLINES
MORE THAN SPECIFIED WITH
THE TECHNICAL DATA.
After starting the truck by the magnetic lock, move
the tiller to the operating zone (‘F’, Fig.9).
Fig. 9: Operating direction
