10
Use truck without manufacturer
’
s instructions manual.
Lifted loads could become unstable at wind forces. In the case of wind forces do not
lift the load if there is any influence to the stability.
Watch difference in floor levels when driving. Load could fall down or the truck could get uncontrollable.
Keep watching the condition of load. Stop operating the truck if load becomes unstable.
Brake the truck and activate the battery connector plug (5) by pulling when sliding load on or off the truck.
If the truck has any malfunctions, follow instructions in chapter 10.
Practice maintenance work according to regular inspection. This truck is not designed to be water
resistant. Use the truck under dry condition. Prolonged continuous operation might cause damage of the
power pack. Stop operation if temperature of hydraulic oil is too high.
When operating the electric pallet truck, the operator has to wear safety shoes.
The truck is intended to be used for indoor applications with ambient temperatures
betwee
n
+5
C and + 40
C.
The operating lighting must be minimum 50 Lux.
To prevent unintended sudden movements when not operating the truck (i.e. from
another person, etc.), remove the magnetic lock (3).
4. COMMISSIONING, TRANSPORTING, DECOMMISSIONING
a.
Commissioning
Table 2: Commissioning data
Type
PTE15Q
(540X1150)
PTE15Q
(685X1150)
Commissioning weight [kg]
136kg
139kg
Dimensions [mm]
1554x540x1245
1554x685x1245
After receiving our new pallet truck or for re-commissioning you have to do the following before (firstly)
operating the truck:
Check if are all parts included and not damaged.
Make sure the tiller is assembled correctly (electrical socket is connected and fixed with two plastic
clamps, circlip of the axle is installed).
Check that battery is charged (follow chapter 8).
Do the work according to the daily inspections as well as functional checks.
b.
Hoisting/ transportation
For transporting, remove the load, lower the forks to the lowest position and fix the truck safely with
dedicated hoisting equipment according to the following figures.
