9
The truck is equipped with a battery connector plug (5), which stops all lifting-, lowering-, driving-
functions and engages the fail-safe electromagnetic brake when it is pulled and disconnected. The truck
can be operated after checking the controller functions and connecting the battery connector plug (5).
Before operating, insert the magnetic lock (3) to start the truck.
To prevent unauthorized access, remove the magnetic lock (3).
The truck is equipped with a safety (belly) button (1) which switches the driving function away from the
operator, if the truck travels towards the operator and the tiller is activated in the tillers operating zone.
Follow also the instructions given on the labels and decals. Replace the label and decals in time if they
are damaged or missing.
d.
Identification plate
3. WARNINGS, RESIDUAL RISK AND SAFETY INSTRUCTIONS
DO NOT
Put foot or hand under or into the lifting mechanism.
Allow other person than the operator to stand in front of or behind the truck when it is
moving or lifting/lowering.
Overload the truck.
Put foot in front of the wheels, injury could result.
Lift people. People could fall down and suffer severe injury.
Push or pull loads.
Side or end load. Load must be distributed evenly on the forks.
Use the truck with unstable or unbalanced load.
Pallet Truck
Type
xxxx
Rated capacity
xxxx
kg
Rated voltage
xx
V
Service
weight
without battery
xxxx
kg
Battery
weight
maximum
xxx
kg
Battery
weight
minimum
xxx
kg
Net weight (without
load and battery)
xxx
kg
Lift
height
maximum
xxxx
mm
Serial number
XXXXXXXXXX
Equipment code
XXXXXXXXXX
Manufacturing Name XXXXXXXXXXXXXXX
Manufacturing Address XXXXXXXXXXXXXXX
Fig. 4: Identification plate
Check the ID plate taped on the truck for contents and type.
