44
No. Part name
No. Part name
1
Butterfly left or throttle switch left
16
Seesaw-left or toggle button left
2
Button for horn
17
Magnet holder for seesaw
3
Spring
18
Hinge spring
4
Bearing for camshaft
19
Contact base
5
Magnet
20
Belly switch cover
6
Spring for belly botton switch
21
Optional cover
7
Socket hexagonal Screw, M6X10
22
Seesaw right or toggle button right
8
Socket hexagonal Screw, M3X16
23
Tapping screw, ST4.2X25
9
Washer, 3
24
LED bicolor
10
Butterfly right
25
Housing for LED two parts
11
Edge Shaft
26
Spring RH throttle torsion
12
PCB-clip
27
Spring LH throttle torsion
13
Sensor for rocker lever
28
Printed
board
14
Upper-part
15
Lower-part
4.1 REPLACING OF THE CONTROL HANDLE
STEP 1:
Remove 3 screws fixing the back cover of the handle with 5mm Allen wrench.
STEP 2:
Unplug the connectors of the handle.
STEP 3:
Remove 2 screws fixing the driving
switch with 2.5mm Allen wrench.
