3
SAFETY
The following symbols indicate potential dangers. In any case, please read this information carefully and take
necessary precautions to avoid possible injury and property loss. It is necessary to have cooperation of the
operator to avoid injury, otherwise any precautions are ineffective. Most of the safety accidents that occur in
factories are caused by people who fail to obey simple and effective instructions during working and walking.
A careful and prudent operator is the best guarantee against accidents and is essential for successful
completion of any prevention program.
SAFETY SYMBOLS
DANGER
！
It indicates the danger that may cause death of the operator.
WARNING
！
It indicates a potential hazard that may cause people injury and objects damage.
CAUTION
！
It indicates a caution related to important or useful functions.
Pay attention to the paragraphs marked by this symbol.
NOTE
It indicates notes on important matters and useful functions.
CONSULTATION
It indicates the necessity to refer to the instructions of this manual before performing
any procedures.
GENERAL SAFETY INSTRUCTIONS
Specific warnings and cautions for potential damages to personnel and machine are notified as follows:
DANGER
！
⚫
Disconnect the battery before performing any maintenance/repair procedures.
⚫
Only trained or authorized personnel is allowed to use this machine. Children or disabled people cannot
use this machine.
⚫
Keep the battery far from sparks, flames and incandescent material. During the normal operation
explosive gases are released.
⚫
Do not wear jewelry when working near electrical components.
