Shredders
8. - Instructions for work
49
TBE GBseries 102
JN070AGB B
8.2
Adjustments in working position
8.2.1 Working height
The working height is set by the position of the rear
support unit.
The cutting tools must never touch the
ground.
- Slightly lift the machine from the ground.
- Loosen bolts (1).
- Remove bolts (2).
-
Position roller in holes corresponding to the
required adjustment.
- Reinstall bolts (2).
- Tighten all the screws:
• Torque: 21 daNm (155 lbf ft).
1
2
2
1
Relationship between the working height and the
roller position:
- Hole (1) = 23 mm (0.9’’).
- Hole (2) = 43 mm (1.7’’).
- Hole (3) = 63 mm (2.5’’).
3
2
1
