Assembly Instructions Packet
Classic
Motorcycle Tire Changer
For our latest instructional videos, visit:
NoMarTireChanger.com
(or scan the QR code below)
Page 1: ...Assembly Instructions Packet Classic Motorcycle Tire Changer For our latest instructional videos visit NoMarTireChanger com or scan the QR code below ...
Page 2: ...s do not appear on the diagram 3 Some screws may be more difficult than others to turn in due to powder coating residue in the threads In these cases a drop of oil or other lubricant such as WD 40 can aid in installation as well as partially tightening and then loosening gradually until the screw is completely fastened The remainder of the assembly process should match the assembly instructions If...
Page 3: ... bolts Q and washers R STEP4 Secure one Stop Collar F onto the Back Post E approximately 1 8 below Swivel Tee by tightening 2 set screws P STEP5 SlideClevisCollar G onto Back Post E and leaveloose Thispart needs to spin freely STEP 6 Secure the second Stop Collar F onto Back Post E 1 8 below Clevis Collar G by tightening 2 set screws P STEP7 Slide Back Post E into the top of the Frame D so that it...
Page 4: ...This photo shows what the assembled Classic Tire Changer should look like ...
