Cabling the server
Installing the Vision VS 5000 Server
14
NMS
Communications
Connecting the server's Ethernet interface
The VS 5000 Server has four Ethernet interfaces as shown in the following
illustration. The Ethernet interface labeled 0 is used for Ethernet communications
with the site network. Connect Ethernet 0 to the IP network. The Ethernet 0
connectors on the two VS 5000 Servers must be connected to the IP network to
communicate with each other. This does not need to be a private link.
NET MGT
SERIAL MGT
0
1
PS1
PC
I0
PC
I1
PC
I2
PCI LOCK DOWN
AL
A
R
M
Ethernet 0
0
1
3
2
Ethernet RJ-45 connectors
The following illustration shows the pinout of each of the RJ-45 interfaces:
Pin 8: Transmit/Receive Data 3 -
Pin 7: Transmit/Receive Data 3 +
Pin 6: Transmit/Receive Data 1 -
Pin 5: Transmit/Receive Data 2 -
Pin 4: Transmit/Receive Data 2 +
Pin 3: Transmit/Receive Data 1 +
Pin 2: Transmit/Receive Data 0 -
Pin 1: Transmit/Receive Data 0 +
Pin 1
Pin 8
