NKT Photonics Koheras BOOSTIK LC, Product Manual

Page: 50 / 68

Errors and status indicators
50
Errors and status indicators
For each module, click on the Error and Statu s tab to view the status indicators and if
any error codes are displayed.
Status indicators
The status indicators will be lit green if the condition in the text is true.
Errors
If an error code is listed and cannot be cleared contact NKT Photonics support, see
“Support contact details” on page 90 .
Error codes are listed in Table 14 on page 59 .
Figure 38 Error and status tab
Graphing
As shown in Figure 39 , you can graph the values of selected parameters by clicking
on the Graph tab and selecting the parameter you want to graph. To use the
graphing function:
1. Select the parameters to graph from the drop-down menu at the left/right y-axis
and bottom x-axis of the graph.
2. Modify the left/right y-axis and x-axis maximum range with the input boxes.
3. Set the sample number and rate using the input boxes to the left of the graph.
Error code