-
8
-
38_Anemo-Girouette_HR_um_UK_28
3
INSTALLATION
The masthead unit is attached to the mast using a plate support. Two versions are available:
−
90-60-509 plate equipped with 25 meters of cable.
−
90-60-562 plate equipped with 35 meters of cable.
Measure the length of cable necessary to connect the sensor, attached at the head of mast, to
the TOPLINE bus terminal box inside your boat. Choose the appropriate plate.
3.1 LIST OF ACCESSORIES
-
25 meter masthead unit cable, with plate and support : 90-60-509
-
35 meter masthead unit cable, with plate and support : 90-60-562
-
TOPLINE terminal box : 90-60-121
-
Windmill : 90-60-503
-
Vane : 31-02-050
3.2 INSTALLATION PRECAUTIONS
The choice for the location of the masthead unit is crucial to achieve optimal performances.
The location of the sensor must be:
-
as high and distant as possible from any equipment blocking or disturbing the air flow.
-
horizontal. If the mounting surface is not horizontal, for example the mast head is at an
angle, manufacture a taper gib (figure 2).
-
