Njoy Garun Series, User Manual

Page: 10 / 33

18 19
3.2.1. Main screen
Upon powering on, the LCD will start initialization approximately few
seconds.
After initialization, the main screen will display as shown below. On the
bottom, there are five icons to represent five sub-menus: CONTROL,
MEASURE, SETTING, INFO, DATALOG.
Main screen
3.2.2. Control screen
Touch the icon to enter control sub-menu.
Control screen
Touch the icon to return back to main screen no matter it’s in any screen
of any submenu.
ON/OFF UPS
It will show “Turn on UPS?” when UPS is off.
It will show “Turn off UPS?” when UPS is on.
Touch “YES” to turn on or off the UPS. Then, the screen will return to main
screen.
Touch “Back” to return to main screen immediately or “No” to cancel this
operation and back to main screen.
Turn on UPS Turn off UPS
Battery test
It will show “Battery Test” if the UPS is not in test. Touch “Yes” to start
battery test. Then, it will show “Battery testing..…” during battery test period.
After few seconds, battery test result will show on the screen. Touch “Back”
to return to main screen immediately or “No” to cancel this operation and
back to main screen. It will show “Cancel battery test” if the UPS is in test.
Battery Test Cancel Battery Test