Menu
The menu items below are listed in the order that they will appear when going through them.
LED RGB Values
The clock has one RGB LED under each nixie tube. All colors are adjustable and can be set to a custom brightness.
1.
Red color brightness (0 - 10 levels).
2.
Green color brightness (0 - 10 levels).
3.
Blue color brightness (0 - 10 levels).
Alarm Settings
4.
Alarm mode: 1 - enable; 0 - disable.
5.
Alarm start hour.
6.
Alarm start minute.
WARNING
: Please be aware that alarm is
really
noisy. It will wake the dead. To stop the alarm rotate the knob.
General Settings
7.
Colon tube modes. 0 — blinks once a second (default), 1 — permanently ON, 2 — permanently OFF.
8.
Beep once per hour, on the hour. (0 — disable (default); 1 — enable).
9.
Slot machine frequency (1 – 5. Value is the interval in minutes. 0 - disable).
10.
Spin changing numbers mode (0 — classic; 1 - scroll changing numbers; 2 — wave scrolling).
11.
Animate RGB LED lights (0 — disable; 1 — enable).
Time/Date Settings
12.
12/24 hour mode. (0 — 24h mode (default); 1 — 12h mode).
13.
Date display mode: 0 - DDMMYY; 1 - MMDDYY; 2 - YYMMDD.
14.
Set hours.
15.
Set minutes.
16.
Set seconds.
17.
Set month.
18.
Set day.
19.
Set year.
Sleep Settings
20.
Set sleep starting hour - the clock displays ZZ:
XX
:YY (where
XX
is the value of the sleep start hour).
21.
Set sleep ending hour - the clock displays ZZ:XX:
YY
(where
YY
is the value of the sleep end hour).
22.
Display date at the end of period defined in setting #10 (1 - enable; 0 - disable).
23.
Timeout for motion sensor (options from 1-5) - sets delay time from ~1 minute and longer.
24.
Activates built in motion sensor (for versions 1.14 and later). (0 — disable (default); 1 — enable).
Setting the clock to sleep when not required can help to prolong the life of the Nixie tubes. The sleep feature works
using 24 hour time values. For best results the clock should also be set into 24H mode (menu option 12). To disable
sleep feature - set start value equal to end value .
