User manual – Glass Clock Design #3
rev 1.2
5.6.5
Option 5 – Brightness level
This option selects the brightness level for the display. There are 5
brightness levels to select. '01' → '04' select a fixed brightness level
as follows:
'01' = dim, no colons
'02' = low-medium
'03' = medium
'04' = brightest level
'00' = Auto brightness level. When this level is selected, a light
sensor on the clock will automatically set the display
brightness level.
Note: When the clock is in the dim level, either manually
selected or selected by the auto level, the blinking colons will
not be displayed on the time display.
A blinking '00' → '04' will be displayed in the 2 middle digits, with
the colon on. To change the brightness level, press the black function
button (left side). Press the red mode button (right side) when the
desired brightness level is displayed. The next option will be
displayed.
To cancel the option mode, press and hold the red mode button until
the display goes blank. Release the mode button and the clock will go
back to normal operation. Option 1 - 3 will still be saved, but option 5
will not be saved.
Page 18 of 27