Nixie Dream 4 Tube Clock IN-14 V1.00 Operation Manual
TIP:
All the settings ale located from page 3 to page 15. Clock alarm setting are located on page 1 and 2.
That is why when you enter the clock settings it will start with page 3.
Just before showing specific
parameters, a page number is shown for 0,5 seconds for your reference.
Let’s get started now.
To enter the setting mode,
press the MODE button for around 3 seconds until you hear a long beep,
then release the button. You can jump now directly to the page 3 in this manual.
To enter the alarm setting mode,
press the SET button for around 3 seconds until you hear a long beep,
then release the button.
Press the SET button repeatedly until the desired hours’ time for the alarm is
set. Press the MODE button to move to the alarm minutes setting. Press the SET button repeatedly until
the desired minutes time for the alarm is set. Press the MODE button to move to the alarm on/off
setting.
MENU PAGE 1
1.1 ALARM HOURS:
The hours tubes light up bright, and the MINUTES are dimmed. Press the SET button repeatedly until
the correct HOURS are shown. Press the MODE button to move to MINUTES.
1.2 ALARM MINUTES:
The hours tubes light up bright, and the MINUTES are dimmed. Press the SET button repeatedly until
the correct HOURS are shown. Press the MODE button to move to MINUTES. Press the MODE button
to move to the alarm on/off setting.
MENU PAGE 2
Press the SET button repeatedly until the desired mode of the alarm is shown.
0: Alarm is ON
1: Alarm is OFF