Nixie Dream 4 Tube Clock IN-14 V1.00 Operation Manual
MODE BUTTON
“Brief Press” of MODE butt
on (less than 1 second, you will hear a single short beep): lets you switch
between different underneath tubes lightings. Press it repeatedly to cycle through RGB lighting and
‘Flickering Candle’ effect.
In RGB mode the colours are changing automatically. When RGB lighting is
active, every next button press will stop the colours changing and keep the selected colour.
“Medium Press” of MODE
button (more than 1 second, you will hear a second short beep) will switch
on/ off the UV (ultraviolet) tubes lighting. To switch it off just repeat perform the medium press again.
“Long Press” of MODE button (more than 3 seconds,
you will hear a single long beep), will enter the
clock settings.
SET BUTTON
“Brief Press” of SET butting (less than 1 second):
a date will be shown for 4 seconds. This is useful if you
want to know the date.
“Long Press” of SET button (more than 3 seconds,
you will hear a single long beep), will enter the clock
alarm mode. Please refer to the SETTING THE CLOCK ALARM SECTION in this manual for more
information.
SETTING THE CLOCK
When in settings mode, pressing and releasing the SET Button will advance the parameter to move onto
the next one. Active parameter will be highlighted, while others will be dimmed. Pressing the MODE
button changes the value of the active parameter.
When you finish going through all the parameters, the clock returns to normal time display mode.
Clock’s parameters are grouped into ‘pages’, one
so called page consists of four tubes, where a particular
parameter(s) is shown within a pair of tubes. Parameters are explained in the manual on a page basis.
IMPORTANT:
In the below sections first digit represent the menu page, the second, the pair of tubes,
the third the tube in the pair.
For example, 1.1 means 1
st
menu page and first pair of tubes. Another example: 1.2 means 1st menu
page and 2nd pair of tubes.
And some final examples: 8.2.1 means the 8
th
menu page, the second pair of tubes, first tube in this pair,
8.2.2 means the second pair of tubes, second tube in this pair.
