Gemini Two Tube Clock
17
Update #1 (21
st
May 2019)
www.nixology.uk
This
MUST BE DONE
AFTER
soldering R1, R2, R3, R4 and the 8 pin DIL
socket in to place
. Be sure to clip the legs of these components as close to the
PCB as possible so that there is sufficient clearance between them and the Buck
Converter PCB. With the mounting pins provided (4 way header pins) there is no
need to trim the legs of the 8 pin DIL socket used for the opto couplers as there
will already be sufficient space Trim the legs of R1, R2, R3 and R3 so they are no
longer than the IC socket pins.
REMEMBER, THIS
MUST BE DONE
AFTER
soldering R1, R2, R3, R4 and
the 8 pin DIL socket in to place and trimming their leads.