Instruction Manual
OCM F
Page 68
OCM F - Rev. 04 as of 18.02.2014
®
9.5.3 I/O Menu „Digital Outputs”
Conditions which are calculated by the transmitter and routed to the relay for
output purposes subsequently can be viewed here. Select from either logically
"OFF“ or "ON.
Fig. 9-57
Screen digital values
The actual output condition of the relay contacts on the output clamps will not
be displayed. The only signal visible is the one the relay is receiving for output
purposes.
External faulty wiring neither can be detected nor indicated in this menu.
9.5.4 I/O Menu „Measurement Data”
This menu is to recall current readings at a glance.
h = Measured level
v = Measured flow velocity
A = Calculated area
Q = Calculated flow rate
t = Measured temperature
q = Quality of velocity measurement (damped)
Fig. 9-58
Screen measurement data
Summary of Contents for osm-f
Page 24: ...Instruction Manual OCM F Page 24 OCM F Rev 04 as of 18 02 2014 Fig 7 3 Clamp wiring OCM F...
Page 102: ......
Page 103: ......
