Instruction manual
OCM Pro CF
®
OCM Pro CF - Rev. 09 as of 07.06.2016
page 29
7.1.2 Wall Mount Enclosure Dimensions
Fig. 7-1
Wall mount enclosure
Hints to avoid electrostatic discharge (ESD)
CAUTION
ESD Risks:
Maintenance procedures which do not require power supply of the instrument
shall not be executed before the unit has been disconnected from mains pow-
er in order to minimise danger and ESD risks.
Disconnect the iXT from mains power!
The sensitive electronic components inside the unit may get damaged by static
electricity. This may impair the instrument’s performance or even lead to instru-
ment failure.
The manufacturer recommends the following steps to prevent the device from
getting damaged due to electrostatic discharge:
-
Discharge static electricity from your body before touching the instrument’s
electronic components.
-
Avoid unnecessary movements to reduce the risk of building up static elec-
tricity
-
Wear a properly grounded antistatic wrist strap to discharge your body and
to keep away static electricity.
Touch components which are sensitive to electrostatic build-up only in antistatic
working areas. Use antistatic floor coverings and working surfaces always if
possible
