Instruction manual
OCM Pro CF
®
OCM Pro CF - Rev. 09 as of 07.06.2016
page 13
2.6 Installation of Spare Parts and Parts subject to wear and tear
We herewith particularly emphasize that replacement parts or accessories,
which are not supplied by us, are not certified by us, too. Hence, the installation
and/or the use of such products may possibly be detrimental to the device’s abil-
ity to work or even lead to instrument failure.
Damages or measurement errors caused by the use of non-original parts and
non-original accessories are left at user’s risk. You can find spare parts or ac-
cessories in chapter 14.
2.7 Device Versions
The OCM Pro CF measurement transmitter is available in different versions. The
type key below gives a brief overview on the various possibilities.
The transmitters vary in terms of the number of inputs and outputs, enclosure
construction, data transmission options, power supply and Ex protection. The
current type of device is indicated by the article number, which can be found on
a weatherproof label on the bottom of the enclosure.
From the type key below the type of device can be specified precisely.
OCP-
Type
S4
M4
R4
F0
W0
00
IN
MA
MI
MG
A4
D4
0
E
OCP-
Intrinsically saf e sensor supply in Ex zone 1
Internet communication via GPRS (GSM antenna required) (for W0
l
)
Pow er Supply
100-240 V AC / 47-63 Hz
9-36 V DC
ATEX Approvals
none
Internet communication via internal ISDN modem (f or W0 enclosure)
Standard version w ith 2 relays, 2 mA output (galv. isolated), 1 mA input
(galv. isolated w ith 2-w ire sensor supply) or for external level measurement
Multifunctional version w ith 5 relays, 4 mA outputs (galv. isolated), 4 digital inputs, 5 analog
inputs (1 of them galv. isolated w ith 2-w ire sensor supply), integrated 3-point step controller
w ith f lush function, connecting options f or up to 3 sensors
Panel mounting IP54 / IP20, no data transmission available
Construction
Wall-mounting IP65
Data Transm ission
w ithout Internet communication (for F0 enclosure)
Internet communication via Intranet (f or W0 enclosure)
Internet communication via internal analog modem (f or W0 enclosure)
Multifunctional version w ith 5 relays, 4 mA outputs (galv. isolated), 4 digital inputs, 5 analog
inputs (1 of them galv. isolated w ith 2-w ire sensor supply), integrated 3-point step controller
w ith f lush function, connecting options f or one Radar sensors, type OFR
Fig. 2-2
Type key for OCM Pro CF measurement transmitters
