Instruction manual
OCM Pro CF
page 10
OCM Pro CF - Rev. 09 as of 07.06.2016
®
2.2 Safeguards and Precautions
WARNING
Germ contamination
Please note that due to the operation in the waste water field the measure-
ment system and cables may be loaded with dangerous disease germs. Re-
spective precautionary measures must be taken to avoid damage to one’s
health.
Wear protective clothing.
WARNING
Observe regulations for health and safety at work
Before starting installation work, observing the work safety regulations need to
be checked.
Failure to do so may cause personal injury..
WARNING
Do not disable safety devices!
It is strictly prohibited to disable the safety devices or to change the way they
work.
Failure to observe may cause personal injury as well as to system damage.
WARNING
Disconnect from power supply
Disconnect the instrument from power supply before you begin to execute
maintenance, cleaning and/or repair works. Repair works shall be executed
solely by expert personnel.
Disregarding may lead to electrical shocks.
Important Note
The entire measurement system shall be installed and put into operation only
by qualified personnel.
2.3 Liability Disclaimer
The manufacturer reserves the right to change the contents of this document in-
cluding this liability disclaimer without prior notice and cannot be held responsi-
ble in any way for possible consequences resulting from such changes.
For connection, initial start-up and operation of the OCM Pro CF the following in-
formation and higher legal regulations (e.g. in Germany VDE), such as Ex-
regulations as well as safety requirements and regulations in order to avoid ac-
cidents, must be kept.
All operations on the device which go beyond installation or connection
measures in principle shall be carried out by NIVUS staff or personnel author-
ised by NIVUS due to reasons of safety and guarantee. The manufacturer is not
liable for failures resulting from improper or inappropriate use.
