Nivus NivuLog Easy V3, User Manual

Page: 99 / 141

Chapter 10 User interfaces
10.2.1.1.8 Basic settings
Connection type Selection of the connection type
Interval The device connects in the transmission cycle.
Interval & wakeup The device connects to the server in the transmission cycle
and can be placed into Aloha transmission mode via the
server.
online The device does not disconnect the connection and
continuously transmits the measurement data. However,
every 7 days, the connection is temporarily interrupted in
order to verify the server assignment.
Operating mode Selection of the operating mode
normal Operation in accordance with the configuration
transport Transport lock activated. This means that all of the
operations (measurement, recording, transmission, etc.)
are stopped to minimise energy consumption during
transport or storage.
Start Aloha mode Selection of how the device should react to a wakeup via the server interface (i.e.
upon receipt of a wakeup SMS)
Off Only a standard connection is established.
Once An Aloha transmission is executed once immediately after
the standard connection is established. This parameter is
then set to "Off" by the device.
On During the next connection, the device switches to test
mode for the time specified via the "Online time"
parameter. An Aloha transmission is also triggered
immediately after the standard connection is established.
Online time Duration of the Aloha connection
Transmission cycle Time between transmissions
Transmission cycle quick Time between the transmissions, if a alternative transmission cycle should be
used because of a trigger being initiated
NivuLog Easy V3 - Rev. 03 as of 24.10.2018 99 of 141