Nivus NivuFlow 750, Instruction Manual

Page: 82 / 162

Instruction Manual
NivuFlow Mobile 750
page 82 NFM 750 - rev. 03 / 27.05.2020
36.3.2 Selecting the Sensor Types
Select between four different sensor types or automatic detection:
•
CSM Wedge
•
CSM Wedge + Press
•
CSP Wedge
•
CSM Pipe
•
auto identification
Fig. 36-13 v-Sensor selection
36.3.3 Sensor mounting position
Extra application parameters can be set for the installation of v-sensors.
These parameters are intended mainly for installation positions which vary from the default
settings.
Option >Flush with wall< (only for channel profiles)
•
Pipe
•
Egg profile
•
U profile
The parameters >Mounting height<, >Distance centre< and >Mounting angle<, which need to
be adjusted to each other, can be entered here.