Nivus NivuFlow 750, Instruction Manual

Page: 15 / 162

Safety Instructions
NFM 750 - rev. 03 / 27.05.2020 page 15
3.2 Warning notices on the product (option)
General warning label
This symbol is for operators to refer to this instruction manual.
Observing the information contained therein is required in order to maintain protection
measures provided by the instrument during installation procedures and operation.
Protective conductor
This symbol refers to the protective conductor of the unit.
Depending on the mode of installation the instrument shall be operated solely connected to
an appropriate protective conductor according to applicable laws and regulations.
4 Safeguards and Precautions
Working with NIVUS instruments requires to observe and to follow the safety
measures and precautions below generally and at any time. These notes and warnings
will not be repeated for each description within the document.
WARNING Check danger through explosive gases
Prior to beginning mounting, installation and maintenance make sure to observe any regu-
lations on safety at work as well as to check the potential risk due to explosive gases. Use
a gas warner to check.
When working in the channel system make sure to avoid electrostatic charge:

Avoid unnecessary movements to minimise the risk of static energy accumulating.

Discharge any possible static electricity from your body before you begin to install
sensors.
Disregarding may lead to personal injury or damage your equipment.