Instruction Manual
NivuFlow 650
page 120
NF 650 - rev. 01 / 29.06.2020
NIVUS Header
When the check mark is set, a NIVUS logo is displayed/printed on the output table. Without a
check mark there is no NIVUS logo and the table appears neutral.
Units for storage
• In metric system - e.g. l/s, m³/s, m³/d, cm/s etc.
• In English system - e.g. ft³/s, in, gal/min, Mgal/d, in/s, yd/s etc.
• In American system - e.g. gps, gpm, cfs, cfm, cfh, cfd, mgd etc.
Units for storing measurement data
• Flow
• Flow velocity
• Level
• Total
• Temperature (in unit system "English" only)
34.3 Time/Date
This submenu is used to change the system time of the transmitter and the current date.
This function is required to select summer or winter time, after power failure or if the internal
buffer battery should fail. If the transmitter is operated for a long period the internal clock may
deviate. The deviations can be corrected here.
Note
Changing the system time will affect data storage. With the data storage enabled double
data sets or data gaps may occur after the system time has been changed.
Fig. 34-5
Selecting Time/Date
The current system time as well as the time zone (UTC or GMT) relative to the zero meridian
can be adjusted here.
The time server (SNTP) can be activated here, as well.
