Setting Parameters
page 115
NF 650 - rev. 01 / 29.06.2020
app1_t_air [°C]
Standard,
Extended,
Expert
Average calculated air temperature in storage
cycle when using an air-ultrasonic sensor
app1_h_isensor [m]
Extended,
Expert
Average calculated air temperature in storage
cycle when using an i-Series sensor
p1_v [m/s]
Extended,
Expert
Path velocity
p1_g_srch [dB]
Extended,
Expert
Signal amplification of search scan
p1_g_sig [dB]
Extended,
Expert
Signal amplification of measurement signal
p1_ntyp_up [dBµ]
Extended,
Expert
Typical noise on channel 1 towards the flow direc
-
tion / upstream
p1_nmax_up [dBµ]
Extended,
Expert
Maximum noise on channel 1 towards the flow
direction / upstream
p1_ntyp_dn [dBµ]
Extended,
Expert
Typical noise on channel 1 in flow direction /
downstream
p1_nmax_dn [dBµ]
Extended,
Expert
Maximum noise on channel 1 in flow direction /
downstream
sys_t [°C]
Expert
Temperature in the transmitter
Tab. 33-9 Explanations on the data (USB storage)
The function
>Load Parameters<
permits to load data files previously saved to USB stick
back to the transmitter.
By using the function
>Save Parameters<
you can save all parameters of the measurement
place to USB stick. During this procedure a total of two files will be created and saved.
Formats of the created files:
•
XXXX_DOC_AABBCCDDEE.pdf
This file is for documentation purposes and contains basic settings as well as modi-
fied parameter settings.
•
XXXX_PAR_AABBCCDDEE.xml
This file contains the complete parameter set for the transmitter and is used to save
the parameter settings.
Explanation of file names:
XXXX =
Name of measurement place as set
AA
=
Year
BB
=
Month
CC
=
Day
DD
=
Hour
EE
=
Minute
Â
Ü
You can convert unformatted or incorrectly formatted USB sticks into the correct format
directly on the instrument:
1. Turn the rotary pushbutton until >Format USB-Stick< is highlighted blue.
2. Press the rotary pushbutton to format the plugged USB stick.
>SUCCESSFUL< will appear in the display as soon as the stick has been format-
ted.
