Chapter 2: Preparing for Management
Preparing for Management
NGSME16T2H User Manual | 24
Preparation for Telnet/SSH Interface
If your Window OS is Win XP, Win 2000 or early version, you can access the Telnet
console by default command. If your OS is Window 7 or later version, please
download the terminal tool, such as HyperTeminal or Putty.
The switch support both Telnet and SSH console. The SSH console can be treated
as secured Telnet connection, need to enable the SSH feature in "Security / Switch /
SSH".
Tradition way for Telnet Connection
1. Go to Start -> Run -> cmd. And then press Enter
2. Type the
Telnet 192.168.2.1
(or the IP address of the switch). And then press
Enter.
Access Telnet or SSH by Terminal tool, Putty.
1. Open Telnet/SSH Client/PuTTY
In the Session configuration, choose the Telnet/SSH in Protocol field.
In the Session configuration, enter the Host Name (IP Address of your switch) and
Port number (default Telnet =23, SSH = 22).
Then click on “Open” to start the SSH session console.
