background image

Due to continuous product development/improvement the specifications and configurations in this 

document are subject to change without prior notice.

Manufactured by :

NITTO KOHKI Co., Ltd.

2-9-4, Nakaikegami, Ohta-ku, 

Tokyo, 146-8555, Japan

TEL  : (81)-3-3755-1111 

FAX  : (81)-3-3753-8791

E-mail : [email protected]

URL : www.nitto-kohki.co.jp

Keep the manual handy – so you can use it whenever necessary.

PNEUMATIC NEEDLE SCALER

Please read this manual carefully before you attempt to use 

your tool so that you may use it properly and safely.

JET CHISEL

Model AJC-16, JC-16, JT-20, JEX-20, JEX-24 JEX-28, JEX-2800A

PROFESSIONAL TOOL

Original Instructions

Model 

AJC-16

Model 

JEX-20

Model 

JEX-24

Model 

JEX-28

Model 

JEX-2800A

Model 

JC-16

Model 

JT-20

Specifications

Model

AJC-16 JC-16 JT-20 JEX-20 JEX-24 JEX-28 JEX-2800A

Maximum Operating Pressure

MPa

0.6

Air Consumption (No Load)

m

3

/min

0.07

0.15

0.2

0.2

0.27

0.35

0.43

Stroke Speed (No Load)

min

-1

6000

4000

4000

4000

4000

4500

3700

Sound Pressure Level (Load)

dB(A)

88

90

92

93

93

95

95

Sound Power Level (Load)

dB(A)

99

101

103

104

104

106

106

Vibration Level (Load)

m/s

2

7.9

3.8

6.6

3.3

6.2

12.1

7.2

Mass (Weight)

kg

0.98 

1.4

2.4

2.75

2.7

3.5

3.3

Thread Size of Air Inlet

Rc3/8

JET CHISEL.indd   1

11.2.18   2:12:20 PM

Summary of Contents for AJC-16



















Reviews: