150-22842 - Rev A
Pro 1800 Race
User Guide
BATTERY CHARGING
1. Plug the AC Power Adapter into an electric outlet,
then plug the cable from the AC Power Adapter into
the Battery.
2. The indicator light will be red until the battery is
fully charged; then it changes to blue.
3. Unplug the AC Adapter from the Battery by grasping
the connectors rather than the cable.
4. Leaving the Battery and AC Adapter connected
indefinitely will not harm the batteries.
5. When storing for an extended period of time, charge
battery every three months to maximize battery life.
RIDING AT NIGHT
While a Pro 1800 Race lighting system will improve
your view, control and enjoyment of night riding,
please remember that cycling at night is an inherently
dangerous activity. In addition to using your lighting
system properly and riding with extreme caution,
NiteRider urges you to:
• Never ride alone.
• Always let someone know where you are going.
• Wear a helmet and reflective clothing.
• Carry an auxiliary light and emergency supplies.
• Make sure the headlamp, mounting bracket and
battery are securely fastened.
• Always disconnect the battery from the
headlamp when transporting the light system.
PROTECTING YOUR INVESTMENT
Properly charge your battery to maximize its lifespan (see the
“Battery Charging and Care” section for detailed information).
The Pro 1800 Race will perform in wet weather conditions, but
submerging it in water will damage the system.
SUPPORT
If you experience difficulties during product installation or
operation, NiteRider provides free telephone support on
weekdays from 8:00 AM to 4:30 PM (Pacific Time)
at 800.466.8366, ext 4. You may also e-mail us at
WARRANTY
NiteRider stands behind its products with the following
warranties:
• Lifetime warranty on all mechanical components
• 2 years on electrical components
• 180 days on rechargeable batteries
To obtain warranty service, it is preferable to have your
original sales receipt. Contact the NiteRider customer
service department at 800.466.8366, ext 4 to obtain a Return
Merchandise Authorization (RMA) number. The RMA number
must be prominently displayed on the outside of your package.
The product must be properly packaged to prevent damage
in transit. For complete warranty information, please visit our
website at www.niterider.com.
RUN TIMES
The Pro 1800 Race will run up to:
Light Level
High
Med
Low
Walk
Time*
1:30
3:00
6:00
25:00
Lumens
1800
700
400
80
*
Run Times are approximations and will vary.
NiteRider Technical Lighting Systems, Inc.
8295 Aero Place, Suite 200
San Diego, CA 92123
www.niterider.com
Fuel Gauge
The 8-step, LED fuel gauge is located on
top of the headlamp in front of the power
button. When all four LED’s are lit solid
green, the battery is fully charged. As
the battery discharges ⅛ increments of
capacity, the LED’s from right to left, successively go from solid
to blinking green, to out.
With only the final ⅛ capacity remaining one LED blinks red. At
this time, the headlamp should be turned off and the battery
recharged.