TM 06
Features
· The world’s smallest and lightest 3800lm flashlight
· Utilizes four CREE XM-L2 U2 LEDs
· Features advanced temperature regulation (ATR) technology
· Tactical forward switch on the tail cap
· Innovative two stage side switch accesses different modes and
functions (patented)
· Integrated power indicator on side switch indicates remaining battery
power (patented)
· Power indicator displays battery voltage accurate to 0.1V
· Direct access to ultra-low or turbo output
· Toughened ultra-clear mineral glass with anti-reflective coating
· Integrated “Precision Digital Optics Technology” provides extreme
reflector performance
· Stainless steel bezel ring protects core components from damage
· Constructed from aerospace grade aluminum alloy
· HAIII military grade hard-anodized
· Waterproof in accordance with IPX-8 (submersible to 2 meters)
Dimensions
Length: 4.92” (125mm)
Head diameter: 1.97” (50 mm)
Tube diameter: 1.97” (50mm)
Weight: 9.77oz (277 gram) (without battery)
Battery Options
NOTE:
After loading the batteries, the power indicator light will blink to
indicate the battery voltage. Please refer to the “Power Tips” section of
this manual for details
WARNING:
1. Insert batteries as labelled on the inside of the battery compartment.
2. Do not mix batteries of different types/brands.
3. When the TM06 is stored in a backpack or left unused for extended
periods, Nitecore recommends the tailcap is loosened to cut off the power
entirely, thus preventing accidental activation of the flashlight.
Momentary Illumination
Press the tail switch partway to turn the light on, simply release to turn off
Constant Illumination
To turn on: press the tail switch until a “click” is heard
To turn off: press the tail switch again until a “click” is heard to turn the
light off and enter standby mode
Standby mode: When in standby mode, press the side switch all the way
down to activate the power indicator to flash once every three seconds,
thus helping users locate the flashlight in dark conditions. In standby
mode, the TM06 will operate for up to 30 days with the power indicator on
and up 108 days with the power indicator off.
Brightness Levels
The TM06 utilizes a 2-stage switch similar to a camera shutter button. The
light’s numerous functions are selected according to the depth the switch
is pressed.
With the light turned on, press the side switch all the way down repeatedly
to cycle through ultra-low, low, medium, high and turbo brightness levels.
Alternatively, with the light turned on, press the side switch partway to
adjust the brightness levels in reverse until ultra-low output is displayed.
Note:
When in ultra-low/low/medium/high mode, press and hold the side
switch partway down for more than one second will access turbo mode.
Instant ultra-low/turbo
When in standby mode, press the tail switch while holding the side switch
partway down to enter ultra-low mode (3 lumens).
When in standby mode, press the tail switch while holding the side switch
all the way down to enter turbo mode (3800 lumens)
Special Modes (Strobe/Location
Beacon/SOS)
With the light turned on, press and hold the side switch for more than one
second to enter Strobe mode. To cycle through SOS, Location Beacon and
Strobe modes, simply press and hold the side switch for more than one
second once again. To exit special mode and resume the previously used
output, simply press the side switch again.
NOTE:
The TM06’s memory function offers direct access to the previously
used brightness when reactivated.
Power Tips
1. With the light turned on, the blue LED built into the switch will flash
once every two seconds when battery power levels reach 50%. The blue
LED will flash quickly when battery power is close to depletion.
2. Each time batteries are inserted, the power indicator light will blink in
varying patterns to indicate battery voltage (accurate to ±0.1V). For
example, when battery voltage is at a maximum charge of 4.2V, the power
indicator will blink 4 times in quick succession, followed by a one second
pause, and then two more blinks, thus indicating the battery voltage
detected is 4.2V. Different voltages represent the corresponding remaining
battery power levels:
NITECORE (SYSMAX)
is a member of PLATO, participating in and
helping to develop the ANSI FL1 standard of measurement. Product
testing data is in accordance with these internationally recognized
scientific standards.
NOTICE:
The above data has been measured in accordance with the international
flashlight testing standards ANSI/NEMA FL1 using 4 x 3.7V 2600mAh
18650 batteries under laboratory conditions. The data may vary slightly
during real-world use due to battery type, individual usage habits and
environmental factors.
ATR Technology
Advanced temperature regulation (ATR) technology allows the TM06 to
dynamically adjust output performance according to its body temperature.
This prevents damage from overheating and prolongs its working life.
Changing/Charging Batteries
Batteries should be replaced when any of the following occurs: The
power indicators blinks rapidly, output appears to be dim or the flashlight
becomes unresponsive.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a
thin coating of silicon-based lubricant.
Warranty Service
All NITECORE® products are warranted for quality.Any DOA / defective
product can be exchanged for a replacement through a local
distributor/dealer within 15 days of purchase. After 15 days, all defective /
malfunctioning NITECORE® products will be repaired free of charge for a
period of 60 months (5 years) from the date of purchase. Beyond 60
months (5 years), a limited warranty applies, covering the cost of labor
and maintenance, but not the cost of accessories or replacement parts.
The warranty is nullified in all of the following situations:
1. The product(s) is/are broken down, reconstructed and/or modified by
unauthorized parties.
2. The product(s) is/are damaged through improper use.
3. The product(s) is/are damaged by leakage of batteries.
For the latest information on NITECORE® products and services, please
contact your national NITECORE® distributor or send an email to
[email protected]
The Nitecore official website shall prevail in case of any product data
changes.
Operating Instructions
Battery installation
1. Insert batteries with the positive (+) and negative (-) ends
corresponding to the diagram on the inside of the battery compartment.
2. Tighten the tail cap by aligning the two metal pins on the inside of the
tail cap with the corresponding holes on the flashlight body and rotate
clockwise.
*Warning:
Do not use the TM06 with RCR123 or CR123 batteries for it
may damage the flashlight.
Output & Runtime
Accessories
Quality holster, lanyard,
spare O-ring
TURBO
HIGH
MID
LOW
LOWER
LUMENS
3800
LUMENS
1500
LUMENS
480
LUMENS
160
LUMENS
3
45
min
9h
25h
433h
3
h
15
min
334m
(Beam Distance)
28000cd
(Peak Beam Intensity)
1.5m
(Impact Resistant)
IPX-8, 2m
(Waterproof AND Submersible)
Thanks for purchasing NITECORE!
User Manual
®
The All-Round Flashlight Expert
SIZE
Nominal voltage
Compatible
Primary Lithium battery
CR123
3V
NO
18650 Rechargeable Li-ion battery
18650
3.7V
Yes (Recommended and
can be recharged)
Rechargeable Li-ion battery
RCR123
3.7V
NO
NOTE:
When a detected battery is not of the 18650 type, the power
indicator light will blink rapidly to notify the user.
