3
Version date: March 26
th
2018
12
Operator Manual
NA 64-- series gravity
3 Installation
Read this chapter carefully before installing the machine. This is
the only way to ensure maximum safety.
3.1 Introduction
The dealer carries out the initial installation. When moving the machine you are
advised to contact the dealer.
The machine may only be installed by qualified personnel.
3.2 Installation site
• DO NOT place the machine outside.
• Place the machine on a firm, flat surface
(to prevent noise and vibration).
• Keep 10 cm free at the rear and 2 cm at the sides for ventilation.
• Do not place the machine in direct sunlight (not even behind glass) or near to
a heat source (e.g. radiator or deep fryer).
• Place the machine in a room with a temperature b5°C and +35°C.
3.3 Electrical connection
• Connect the plug of the machine to a high-voltage power supply (400 volts,
3 x 16 amps + N + PE).
When setting up the machine, make sure it is not positioned on
the connection cable. This can damage the insulation and lead
to a short-circuit.