Nissei DM-3000 Instructions Manual Download Page 5

- 5 -

REGULAR SIZE CUFF

for arm circumference of 22 to 32 cm

AC ADAPTOR

INSTRUCTION

MANUAL

RECHARGEABLE

NICKEL METAL HYBRID

(NiMH) BATTERY

LARGE SIZE CUFF

for arm circumference of 32 to 42 cm

AIR TUBE

AIR PLUG

ADAPTOR PLUG

BATTERY PLUG

AIR CONNECTOR

AIR CONNECTOR

Order No.: NPDM3000-010

CUFF SHELL : NPDM3000-030

BLADDER : NPDM3000-040

AIR PLUG : B112784-1

Order No.: NPDM3000-011

CUFF SHELL : NPDM3000-031

BLADDER : NPDM3000-041

AIR PLUG : B112784-1

Order No.:  NPDM3000-001(EU)
 NPDM3000-002(UK)

Order No.:  NPDM3000-005

Model 

: DM-3000

Operating Principle 

:  Oscillometric method (AUTO measurement) / auscultation (MANUAL 

measurement)

Indicator 

:  300 digits column LCD and 10 digits segment LCD

Pressure Indicating Range  :  0 to 300 mmHg (cuff pressure)
Measuring Range 

:  50 to 250 mmHg (systolic) 

40 to 180 mmHg (diastolic) 

40 to 160 bpm (pulse rate)

DM-3000 is an automatic sphygmomanometer intended for measurement of systolic and diastolic 

blood pressure and pulse rate in adult patients, i.e., age 12 and above. This product is not designed 

for neonatal use and inaccurate readings may result if it is used on children.

PRODUCT FEATURES

COLUMN LCD and SEGMENT LCD

The pressure can be read in the column LCD height and as digital value in the segment LCD. 

"AUTO" and "MANUAL" Modes of Measurement

Determination of blood pressure can be made either automatically by the oscillometric method or 

manually by the Auscultatory method using a stethoscope.

Regular and Large Size Cuffs

The regular size cuff will accommodate an upper arm circumference range of approximately 22 to 32 

centimeters and the large size cuff will accommodate that of approximately 32 to 42 centimeters.

Operation with AC Adaptor or Rechargeable Battery

DM-3000 is powered by either an AC adaptor or rechargeable nickel metal hybrid (NiMH) battery.

PRODUCT SPECIFICATIONS

COMPARISON TABLE

MANUAL

MODE

cuff inflation

deflation rate

saving result

AUTO

maintained at 4.0 to 

4.9 mmHg/sec
maintained at preset 

rate: 2.5, 4.5 or 6.5 

mmHg/sec

automatically performed to 

preset pressure value
automatically performed to 

preset pressure value or 

manually performed with 

inflation bulb*

seven measured results 

automatically saved in memory.

 * Inflation bulb is not included in the product.

GENERAL PRODUCT INFORMATION

Summary of Contents for DM-3000

























Reviews: