- 15 -
Seven measured results and their average obtained in "AUTO" mode are
automatically saved in the memory. When the results exceed 7, the oldest data will be
deleted to record a new result.
The results are not saved when the measurements are performed in "MANUAL" mode.
Recalling measured data
1. Turn on the MAIN POWER SWITCH and set the device to "AUTO" with MODE
SELECTOR.
An average of the stored results is displayed first.
2. Press "M" button to recall stored data one by one. Figure following "No." indicates
sequence of data, the larger the number, the older the data. However, maximum
data can that be stored is 7.
Deleting stored data
Deleting a single data
1. Recall a data to be deleted.
2. Press and hold down "M" until the LCD Display starts flashing and the data
disappears subsequently.
3. New average is recalculated on remaining data and stored.
Deleting all data
1. Recall Average following Data Recalling procedure.
2. Press and hold down "M" till the LCD Display starts flashing and the data
disappears subsequently.
MEMORY FUNCTION