For how-to videos and more, visit ninjacoffeebar.com | Questions? 1-877-646-5288
2.
Hold the cup under the
frother and submerge
the whisk just below the
surface of the milk. Froth
for 30–45 seconds.
3.
Remove the frother whisk
by twisting clockwise. Keep
your cup below the whisk while
you carry it to your sink or
dishwasher for easy cleaning.
For how-to videos and more, visit ninjacoffeebar.com | Questions? 1-877-646-5288
CF110 SERIES
Please make sure to read the enclosed Ninja
®
Owner’s Guide prior to using your unit.
FILLING THE WATER RESERVOIR
For how-to videos and more, visit ninjacoffeebar.com | Questions? 1-877-646-5288
1
BEFORE YOUR
FIRST BREW
Before first use, plug in your brewer
and run two Multi-Serve Clean cycles.
With your water reservoir filled to the
max line with fresh water, your brewer
plugged in, and a 22 oz. or larger
container in place, press the CLEAN
button to start a cycle.
(Discard the brewed water after each cleaning cycle.)
FILL TO THE MAX LINE.
Let Auto-iQ
™
take it from there.
The water reservoir lid is removable for
easy cleaning and is dishwasher safe.
REMOVABLE BREW BASKET
FOR EASY CLEANUP
To avoid spills and drips, keep the
filter inside the removable brew
basket as you carry it to the trash.
STOP THE DRIPS AFTER THE BREW
At the end of a brew, close the drip
stop to prevent drops of coffee
from escaping.
DRIP STOP
CLEANUP
QUICK START
GUIDE
HOT OR COLD FROTHING AT YOUR FINGERTIPS
CAUTION: DO NOT reach across top of brewer to froth during brewing. Steam is released from vent on top of
brewer and can result in a steam burn.
1.
Add milk to your cup
until it is about
1
⁄
3
full.
For hot froth, microwave for
45–60 seconds.
For cold froth, skip to Step 2.
FOR HOT FROTH
PLUG IN, POWER UP, AND PRE-HEAT
Plug in your brewer, then press the power
button. The PRE-HEATING light will
illuminate for 3 minutes.
When the light goes out,
you’re ready to brew some
steaming hot coffee.
PRE-HEAT FOR THE HOTTEST FIRST CUP
2
PRE-HEATING
Pre-heating ensures
your first cup will
be as hot as it
possibly can be.
(But if you don’t
have time to wait,
you can still brew
before pre-heat is
fully activated.)