Open the battery cover of the
control panel. Place in two
AAA batteries. Snap the cover.
Align the flange with the holes on
the steering wheel and tighten it
with four M5 screws with the 4 mm
hex wrench.
Install the LeanSteer
4 Assembling, Adjustment and Replacement
1
4
2
3
5
Secure the cap.
6
●
Install the batteries
①
Take the control panel out of the steering wheel.
②
Open the battery cover and place in batteries.
③
Close the battery cover.
●
Features
Toggle button:
-Toggle up or down to open the control panel; Press up or down to close it.
-Toggle up to increase the display's brightness; toggle down to reduce the brightness.
Speedometer:
Displays the current speed of the S-Max.
Bluetooth
:
Flashing blue: Bluetooth is waiting to be connected.
Solid blue: the vehicle is connected to S-Max.
Battery level
:
Indicates the remaining battery of the control panel. When the battery is nearly empty, it appears red. Please
replace the AAA batteries.
Reset:
Long press this key to pair when the control panel is not connected with vehicle, or need to reconnect.
*
The control panel and the App cannot be connected to the S-Max at the same time. If you have connected the S-Max to
the app, disconnect it first, and then pair with the control panel.
Control panel
Take it out here
Speedometer
Bluetooth
Battery level
Toggle button
Battery compartment
Reset
* Two AAA batteries needed.
Insert the LeanSteer’s upper
section into the lower section, then
tighten the four M4 screws with the
2.5 mm hex wrench.
Front
Back
Press the control panel into the
center of the steering wheel.
Insert the LeanSteer into the vehicle
body and tighten the two M5 screws
with the 4 mm hex wrench.
07
08
