NIMO PRO FT 120 VP, User Manual

Page: 48 / 52

48
ENGLISH
MAINTENANCE
N.B.
High pressure cleaning equipment must not
be used!
Cleaning
See Figure P
Clean the walls of the cabinet with a damp cloth and
mild soap solution.
Detach and remove the lint filter and clean using the
brush supplied.
Service
See page 2
Make a note of the drying cabinet’s designation, part
number and serial number
before contacting the
service department.
This information is available on the type plate on the
inside of the cabinet.
Replacement part
Follow the recommendations from NIMO when car-
rying out repairs or replacing parts.
If the connection cable is damaged for any reason, it
must be replaced. Original parts are available from the
distributor of the cabinet.
N.B.
Replacement cords may be fitted only by
the manufacturer, the manufacturer’s service agent
or other certified electrician.