Nilfisk-ALTO FLOORTEC 480M User Manual Download Page 21

1464361000(1)2009-11 A

FLOORTEC 480M

3

USER MANUAL

ENGLISH

SYMBOLS

DANGER!

It indicates a dangerous situation with risk of death for the operator.

WARNING!

It indicates a potential risk of injury for people.

CAUTION!

It indicates a caution or a remark related to important or useful functions.
Pay careful attention to the paragraphs marked by this symbol.

NOTE

It indicates a remark related to important or useful functions.

CONSULTATION

It indicates that it is necessary to consult the User Manual before performing any procedure.

GENERAL INSTRUCTIONS

Speci

fi

 c warnings and cautions to inform about potential damages to people and machine are shown below.

WARNING!

To reduce the risk of fi re or personal injuries:

This sweeper is not suitable for collecting dangerous powders.

 

Do not collect toxic, carcinogen, combustible materials or other dangerous materials such as asbestos, 

 

arsenic, barium, beryllium, lead, pesticide or other harmful materials.
Do not collect burning cigarette butts or other burning objects, ash, matches or similar.

 

To remove glass, metals or sharp objects from the collection tank, wear thick gloves to prevent personal 

 

injuries.
Empty the collection tank after each use.

 

This walk-behind sweeper is not suitable to collect liquids.

 

This sweeper must be used in dry conditions, it must not be used or kept outdoors in wet conditions.

 

Do not use the sweeper on inclined surfaces.

 

Do not allow to be used as a toy. Pay careful attention when using the machine near children.

 

Use only brooms supplied with the machine or those specifi ed in the User Manual. Using other brooms could 

 

reduce safety.
Before using the sweeper, doors and covers must be as shown in the User Manual.

 

During the sweeper operation, foreign materials may get into the eyes of the operator. Thus, it is advisable to 

 

wear protective glasses.
Please be watchful. Pay careful attention to the machine operation and use common sense. Do not use 

 

the machine when tired, absent-minded, under the effect of drugs, alcoholics or medicines which can 
compromise the control over the machine.

MACHINE DESCRIPTION

TECHNICAL DATA

General

Values

Cleaning width with side brooms

820 mm

Main cylindrical brush cleaning width

450 mm

Machine size with folded handlebar (length x width x height)

890 x 820 x 345 mm

Machine size with unfolded handlebar (length x width x height)

1,300 x 820 x 1,030 mm

Main broom size (diameter x length)

150 x 450 mm

Side broom diameter

260 mm

Collection tank capacity

34 L (theoretical) - 19 L (actual)

Machine total weight

16 kg

Summary of Contents for FLOORTEC 480M





































Reviews: