14
FLOORTEC 350
146 3083 000(2)2008-11 A
ENGLISH
USER MANUAL
MAIN BROOM DISASSEMBLY/ASSEMBLY
CAUTION!
It is advisable to wear protective gloves when
replacing the main broom because there can be
sharp debris between the bristles.
Drive the machine on a level
fl
oor.
1.
Turn the main switch (1) to “0”.
2.
Remove the hopper (9).
3.
Loosen the handwheels (A, Fig. 5) completely on the left
4.
side of the machine.
Remove the lid (A, Fig. 6) by grasping it on the points (B).
5.
Grasp the main broom (A, Fig. 7) on the points (B) and
6.
(C), then disconnect it from the drive hub (D) by pulling it in
the direction shown by the arrow (E); then remove it in the
direction shown by the arrow (F).
The new main broom must be installed with the bristles
7.
rows bent as shown in the
fi
gure.
Install the new broom by performing steps 3 to 6 in the
8.
reverse order.
Adjust the height of the new broom according to the
9.
procedure shown in the previous paragraph.
A
S311354
Figure 5
A
B
S311355
Figure 6
D
A
C
B
F
E
S311356
Figure 7
All Parts available from
www.sparesgiant.com
01772 329 565