Engine System - Petrol
95
Service Manual – Floortec R 870
Engine Oil Change
Caution!
The discharged engine oil
must be disposed of properly
according to the Law in force.
Note:
It is advisable to change the oil
when the engine is still hot, to
make the oil downflow easier.
1 Drive the machine on a level ground and engage
the parking brake
2 Turn the ignition key to “0”
3 Open the engine compartment hood with the
handle and fasten it with the support rod
4 Lift and disassemble the right side bulkhead
5
Remove the oil filler plug/dipstick (A). Place the
hose (E) in a position that eases the oil drain,
then remove the plug (F)
6 Drain all the engine oil through the hose (E) and
collect it in a proper container
7 Install the oil drain plug (F) and place the hose
(E) back to the original position
8
Pour new oil in the filler neck (B) up to the
upper limit mark (D) (lower edge of the oil filling
hose) on the dipstick
Note:
For the engine oil type and
quantity, see Specifications
paragraph.
9
Install the oil filler plug/dipstick (A) and tighten
it
10 Perform steps 4 and 3 in the reverse order
A
A
B
F
E
D
P200133