Electrical System
78
Service Manual – Floortec R 870
Removal and Installation
Battery Charger Disassembly/Assembly (Floortec R 870 Battery)
Disassembly
1
Drive the machine on a level floor.
2 Turn the ignition key to “0” and engage the parking brake
3 Open the battery compartment hood with the handle and fasten it with the support rod Disconnect the
battery connector
4 Remove the screws (A) and the battery charger connector (B)
5
Remove the screws (C) on the rear side of the bulkhead, then remove the battery charger protection (D).
6 Remove the screws with the nut (E) and remove the battery charger (F) with the wiring harness (G)
Assembly
7
Assemble the components in the reverse order of disassembly, and note the following:
• The selector (H) must be turned to WET or GEL, according to the type of batteries (WET or GEL)
installed on the machine
H
E
F
C
D
A
B
C
E
E
E
P200125