Dust Guard System
59
Service Manual – Floortec R 870
Removal and Installation
Dust guard System Water Pump Disassembly/Assembly
Disassembly
1
If possible, place the machine on a hoisting system.
2 Turn the ignition key to “0” and engage the parking brake
3 Open the battery/engine compartment hood with the handle and fasten it with the support rod
Disconnect the battery connector (Floortec R 870 Battery) - Disconnect the batteries (Floortec R 870
Petrol/LPG)
4 Lift and disassemble the right side bulkhead
5
On the right front upper side of the machine bed, remove the fastening screws (A) and (B) of the dust
guard system water pump support plate
(
For Floortec R 870 Battery
) If the screws (B) are hidden under the battery, the battery has to be
removed (see the procedure in the Electrical System chapter)
A
B
P200114